Committee on Materials and Pavements


AASHTO Liaisons
Casey Soneira, Program Manager for Engineering
csoneira@aashto.org
Chad Clawson, AASHTO Engineering Fellow
cclawson@aashto.org

COMP Technical Subcommittee 2d – Proportioning of Asphalt-Aggregate Mixtures

COMP TS 2d
AASHTO Designation No. Title
M 323-17 Superpave Volumetric Mix Design
M 325-08 (2017) Stone Matrix Asphalt (SMA)
R 30-02 (2015) Mixture Conditioning of Hot Mix Asphalt (HMA)
R 35-17 Superpave Volumetric Design for Asphalt Mixtures
R 46-08 (2017) Designing Stone Matrix Asphalt (SMA)
R 62-13 (2017) Developing Dynamic Modulus Master Curves for Asphalt Mixtures
R 68-15 Preparation of Asphalt Mixtures by Means of the Marshall Apparatus
R 83-17 Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC)
R 84-17 Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
T 167-10 (2015) Compressive Strength of Hot Mix Asphalt
T 245-15 Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 246-10 (2015) Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) by Means of Hveem Apparatus
T 247-10 (2015) Preparation of Test Specimens of Hot Mix Asphalt (HMA) by Means of California Kneading Compactor
T 283-14 (2018) Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage
T 312-15 Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor
T 320-07 (2016) Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
T 321-17 Determining the Fatigue Life of Compacted Asphalt Mixtures Subjected to Repeated Flexural Bending
T 322-07 (2016) Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device
T 340-10 (2015) Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
T 342-11 (2015) Determining Dynamic Modulus of Hot Mix Asphalt (HMA)
T 344-12 (2016) Evaluation of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
T 378-17 Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
MP 23-15 (2018) Reclaimed Asphalt Shingles for Use in Asphalt Mixtures
MP 38-18 Mix Design of Cold Recycled Mixture with Foamed Asphalt
PP 76-13 (2015) Troubleshooting Asphalt Specimen Volumetric Differences between Superpave Gyratory Compactors (SCGs) Used in the Design and the Field Management of Superpave Mixtures
PP 77-14 (2018) Materials Selection and Mixture Design of Permeable Friction Courses
PP 78-17 Design Considerations When Using Reclaimed Asphalt Shingles (RAS) in Asphalt Mixtures
PP 94-18 Determining Optimum Asphalt Content of Cold Recycled Mixture with Foamed Asphalt
PP 95-18 Preparation of Indirect Tension Performance Test Specimens
PP 96-18 Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) Using the Indirect Tension Testing Method
TP 105-13 (2015) Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB)
TP 107-18 Determining the Damage Characteristic Curve of Asphalt Mixtures from Direct Tension Cyclic Fatigue Tests
TP 108-14 (2018) Abrasion Loss of Asphalt Mixture Specimens
TP 116-15 Rutting Resistance of Asphalt Mixtures Using Incremental Repeated Load Permanent Deformation (iRLPD)
TP 117-15 Determination of the Voids of Dry Compacted Filler
TP 124-18 Determining the Fracture Potential of Ashalt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature
TP 125-16 (2018) Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
TP 131-18 Determining Dynamic Modulus of Asphalt Concrete Using the Indirect Tension Test